This premium Nylon stock sheet offers exceptional strength and wear resistance for demanding suspending and bracing applications. Its robust material composition ensures reliability and longevity under significant stress.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.182" |
| Length | 35" |
| Width | 42" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a substantial 0.182" thickness, a generous 35" length, and a 42" width, providing ample material for a wide range of fabrication needs. Composed of high-grade nylon, it exhibits excellent tensile strength, abrasion resistance, and a high load-bearing capacity, making it an optimal choice for applications requiring durable structural support. Its dielectric properties also lend themselves to environments where electrical insulation is a consideration. The material's inherent toughness ensures it can withstand significant impact and repeated stress cycles without degradation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for plastics. 2. Drill mounting holes as per design specifications, ensuring clean edges. 3. Securely fasten the sheet using compatible hardware, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools that cause delamination or rough edges. | Employ sharp, high-speed cutting tools specifically designed for machining plastics to ensure clean, precise cuts. |
| Over-tightening fasteners, leading to stress concentrations and potential cracking. | Tighten fasteners to the manufacturer's recommended torque specifications, using washers to distribute load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Structural support components, Custom bracing systems, Wear pads and protective shields.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||