Engineered for exceptional durability and wear resistance, this premium Nylon stock sheet is ideal for custom components in material handling systems, offering superior performance under load.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.982" |
| Length | 45" |
| Width | 14" |
Precision-manufactured to tight tolerances, this 0.982" thick Nylon stock sheet measures 45" in length and 14" in width, ensuring consistent dimensional accuracy for critical applications. Nylon's inherent toughness, excellent abrasion resistance, and low coefficient of friction make it an ideal material for wear pads, guide rails, and custom fabricated parts in material handling equipment. Its ability to withstand impact and moderate chemical exposure further enhances its suitability for demanding industrial environments. This sheet provides a robust platform for creating bespoke solutions that improve efficiency and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully inspect the Nylon stock sheet for any defects before cutting or machining. 2. Utilize appropriate cutting tools designed for plastics, ensuring proper cooling to prevent material degradation. 3. Machine to the required final dimensions, maintaining clean edges and precise tolerances.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard metalworking tools without proper modifications or cooling. | Employ carbide-tipped tools designed for plastics and ensure adequate coolant or air blast to prevent melting and tool binding. |
| Over-tightening fasteners during assembly, leading to stress concentrations and potential cracking. | Use nylon or plastic fasteners where possible, or employ washers and torque-limiting tools to avoid over-compression of the Nylon sheet. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads for conveyor systems, Machine guide rails and guides, Fabricated chute liners and impact plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||