This robust Nylon stock sheet is engineered for critical pneumatic applications. Its substantial thickness and durable material composition ensure exceptional performance and longevity under extreme operational stress.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.715" |
| Length | 45" |
| Width | 25" |
Purpose-built for heavy-duty applications, this Nylon stock sheet offers superior mechanical strength and excellent abrasion resistance. With a substantial thickness of 0.715 inches, a generous length of 45 inches, and a width of 25 inches, it provides ample material for fabricating robust components. Nylon's inherent properties, including high impact strength and chemical resistance, make it an ideal choice for seals, wear pads, guides, and structural elements within demanding pneumatic systems operating under significant pressure and dynamic loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut to the required dimensions using appropriate machining tools. 3. Smooth all cut edges to prevent stress concentrations and ensure proper fitment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard nylon for high-pressure applications. | Select a high-performance nylon grade specifically rated for the intended pressure and operating conditions. |
| Inadequate edge finishing after cutting. | Thoroughly deburr and chamfer all edges to prevent premature wear and ensure a good seal. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder components, Wear strips and guides, Sealing elements in high-stress actuators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||