This premium Nylon stock sheet, measuring 0.146" thick, 40" long, and 22" wide, is an essential raw material for robust engineering solutions. Its superior mechanical strength and wear resistance make it ideal for custom fabrication.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.146" |
| Length | 40" |
| Width | 22" |
Precision-manufactured to tight tolerances, this Nylon stock sheet offers exceptional dimensional stability and consistent material properties throughout. The 0.146" thickness provides excellent impact resistance and load-bearing capacity, suitable for components requiring high tensile strength and rigidity. Nylon's inherent lubricity and excellent abrasion resistance ensure extended component life in demanding environments, making it a preferred material for gears, bearings, wear pads, and structural elements in automotive, industrial machinery, and material handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and level. 2. Accurately measure and mark cut lines on the Nylon stock sheet. 3. Utilize appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) for clean, precise cuts.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that can melt or chip the Nylon. | Employ sharp blades designed for plastics, ensuring adequate cooling to prevent melting. |
| Overheating the material during cutting or machining, leading to distortion. | Maintain moderate cutting speeds and use lubrication or coolant if necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Parts, Wear Plates and Bushings, Gears and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||