High-performance Nylon stock sheet, precisely manufactured to 0.585" thickness, 36" length, and 23" width. Ideal for demanding electrical insulation and mechanical component fabrication.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.585" |
| Length | 36" |
| Width | 23" |
Specified by design engineers worldwide, this premium Nylon stock sheet offers exceptional dielectric strength and excellent mechanical properties. The 0.585" thickness provides robust insulation for high-voltage applications, while the 36" x 23" dimensions allow for efficient fabrication of custom parts. Nylon's inherent toughness, abrasion resistance, and chemical stability make it a preferred material for intricate electrical components, protective barriers, and structural elements within electrical enclosures, ensuring long-term reliability and safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free of debris. 2. Cut the Nylon sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated Nylon component using suitable fasteners or adhesives, ensuring proper fit and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using general-purpose cutting tools not designed for dense polymers. | Utilize sharp, specialized carbide-tipped blades designed for cutting Nylon to prevent chipping, melting, or premature tool wear. |
| Over-tightening fasteners, leading to stress concentrations and potential cracking. | Employ controlled torque settings when fastening to avoid excessive pressure on the Nylon material, and consider using washers to distribute load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Electrical Insulators and Bushings, Protective Barriers for Electrical Equipment, Custom Machined Components for Electronic Enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||