This premium lubricating grade Nylon stock sheet offers exceptional wear resistance and a low coefficient of friction. Ideal for fabricated components requiring self-lubricating properties and durability in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.259" |
| Length | 35" |
| Width | 32" |
Specified by design engineers worldwide, this Nylon stock sheet provides superior self-lubricating properties, crucial for minimizing wear and friction in dynamic applications. Manufactured to precise tolerances with a nominal thickness of 0.259 inches, a length of 35 inches, and a width of 32 inches, this material ensures consistent performance and dimensional stability. Its inherent toughness and resistance to abrasion make it an excellent choice for fabricating bushings, bearings, gears, and wear pads where traditional lubrication is impractical or undesirable.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for polymers. 3. Securely fasten the fabricated Nylon component using fasteners that account for Nylon's thermal expansion characteristics.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing stress concentration. | Utilize washers and ensure fasteners are snug but not overly tight, allowing for slight thermal expansion. |
| Using standard metalworking tools without proper adjustments for plastic. | Employ sharp, specialized tooling designed for cutting and machining Nylon to prevent chipping or melting. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Self-lubricating bearings and bushings, Wear pads and guide rails, Gears and sprockets in low-load, high-speed applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||