This high-performance Nylon stock sheet offers exceptional durability and wear resistance. Its robust material properties make it suitable for a wide range of demanding industrial applications requiring strength and low friction.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.304" |
| Length | 39" |
| Width | 45" |
Manufactured under strict quality controls, this 0.304" thick Nylon stock sheet exhibits superior tensile strength and excellent abrasion resistance. Its dimensions of 39" x 45" provide ample material for custom cutting and fabrication. Nylon's inherent dielectric properties also lend themselves to electrical insulation applications. This material is resistant to many chemicals and solvents, making it a reliable choice for harsh operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired cut lines on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw, waterjet) for precise shaping. 3. Secure the fabricated Nylon component using suitable fasteners or adhesives for the intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or chipping. | Employ specialized saw blades or router bits designed for cutting Nylon to ensure clean, precise edges. |
| Over-tightening fasteners, which can cause stress cracking in Nylon. | Use washers and avoid excessive torque when securing Nylon components; consider using locking hardware. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Insulating components, Custom machine parts and bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||