This industrial-grade Nylon stock sheet is engineered for superior performance in demanding environments. Its robust properties ensure durability and reliability for a wide range of manufacturing and fabrication needs.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.826" |
| Length | 34" |
| Width | 28" |
Precision-manufactured to tight tolerances, this Nylon stock sheet measures 0.826 inches thick, 34 inches in length, and 28 inches in width. Crafted from high-quality Nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, making it ideal for applications requiring durability and low wear. Its machinability allows for precise component fabrication. Operating temperature range typically extends from -20°C to 100°C, with good chemical resistance to oils, greases, and many solvents.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw with fine-tooth blade) for clean, precise cuts. 3. Smooth any rough edges with a deburring tool or fine-grit sandpaper.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or incorrect cutting tools, leading to chipping or melting. | Employ sharp, high-quality saw blades designed for plastics, and ensure proper feed rate to prevent overheating. |
| Overheating during machining, causing material deformation. | Use adequate lubrication and cooling (e.g., air blast, cutting fluid) during machining operations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Gears and sprockets, Protective covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||