This high-quality Nylon stock sheet offers exceptional durability and versatility. Its robust material properties make it suitable for a wide range of demanding industrial applications requiring wear resistance and insulation.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.131" |
| Length | 47" |
| Width | 32" |
A proven choice for industrial professionals, this Nylon stock sheet measures 0.131 inches in thickness, 47 inches in length, and 32 inches in width. Engineered from high-grade nylon, it exhibits excellent tensile strength, abrasion resistance, and impact toughness. Its inherent dielectric properties provide reliable electrical insulation. This material is readily machinable, allowing for the creation of custom-fit components, jigs, fixtures, and wear pads that withstand rigorous operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the Nylon stock sheet. 2. Precisely cut the material using appropriate industrial cutting tools. 3. Smooth any sharp edges with a deburring tool for safety and proper fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, leading to rough edges and material stress. | Employ sharp, purpose-built cutting tools for Nylon, ensuring clean cuts and minimizing material degradation. |
| Overheating the material during machining, causing melting and compromising structural integrity. | Utilize appropriate feed rates and cooling methods (e.g., air blast) during machining to prevent excessive heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and bushings, Electrical insulators and components, Jigs, fixtures, and tooling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||