This robust 0.555" thick Nylon stock sheet provides exceptional durability and performance. Its superior material properties make it ideal for custom fabrication in rigorous industrial settings.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.555" |
| Length | 42" |
| Width | 12" |
Designed for demanding industrial environments, this Nylon stock sheet boasts a substantial 0.555-inch thickness, ensuring superior structural integrity and load-bearing capacity. The 42-inch length and 12-inch width offer ample material for a wide range of custom-machined components. Nylon's inherent properties, including excellent wear resistance, high tensile strength, and good impact absorption, make this sheet suitable for applications such as wear pads, bushings, custom tooling components, and protective barriers where durability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) to achieve precise cuts. 3. Smooth any rough edges using sandpaper or a deburring tool for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or chipping. | Employ sharp, specialized cutting tools designed for polymers to ensure clean cuts and prevent material damage. |
| Overheating the material during machining, causing deformation or degradation. | Use appropriate cooling methods (e.g., air blast, cutting fluid) and controlled feed rates to manage heat generation during fabrication. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and guides, Fabrication of bushings and bearings, Protective guards and impact absorption components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||