This robust Nylon stock sheet provides exceptional strength and durability for demanding suspending and bracing applications. Its superior material properties ensure long-term performance in challenging industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.624" |
| Length | 27" |
| Width | 15" |
Engineered for reliability and performance, this 0.624-inch thick Nylon stock sheet measures 27 inches in length and 15 inches in width. Fabricated from high-grade Nylon, it exhibits excellent tensile strength, abrasion resistance, and a broad operating temperature range, making it ideal for applications requiring robust structural support and resistance to environmental degradation. Its inherent lubricity also contributes to reduced friction in dynamic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely mark and drill mounting holes according to design specifications, ensuring proper clearance for fasteners. 3. Securely fasten the Nylon stock sheet using appropriate industrial-grade hardware, ensuring even pressure distribution to prevent material stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress concentrations and potential cracking. | Use torque-limiting tools and apply fasteners evenly, ensuring they are snug but not excessively tight. |
| Incorrectly assessing load-bearing requirements, resulting in insufficient support. | Consult engineering drawings and perform load calculations to verify the sheet's suitability for the intended application. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Heavy-duty bracing components, Structural support elements in machinery, Wear pads and guides in material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||