This robust Nylon stock sheet is engineered for superior performance in rigorous abrading and polishing applications. Its substantial thickness ensures longevity and consistent results under demanding industrial conditions.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.152" |
| Length | 39" |
| Width | 28" |
Purpose-built for heavy-duty applications, this 0.152-inch thick Nylon stock sheet offers exceptional wear resistance and dimensional stability. Measuring 39 inches in length by 28 inches in width, its high tensile strength and impact resistance make it ideal for demanding tasks. The inherent lubricity of nylon minimizes friction, reducing heat buildup during operation. Its non-abrasive nature, when used correctly, protects underlying surfaces while efficiently performing its function in polishing and finishing processes. This material is an excellent choice for custom tooling, wear pads, and protective coverings in abrasive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired cut-out dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw, router) to precisely cut the material. 3. Smooth any sharp edges with a deburring tool or fine-grit sandpaper for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics. | Employ carbide-tipped blades or router bits specifically designed for cutting nylon to prevent melting and achieve a clean cut. |
| Applying excessive heat during cutting or machining. | Maintain moderate cutting speeds and use coolant if necessary to avoid material softening or deformation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and guides, Polishing and buffing substrates, Protective sheeting in abrasive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||