This industrial-grade Nylon stock sheet offers exceptional mechanical strength, high wear resistance, and excellent chemical inertness. Ideal for custom fabrication and demanding component manufacturing.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.258" |
| Length | 19" |
| Width | 21" |
Trusted by engineers across multiple sectors, this Nylon stock sheet provides a robust material solution. With precise dimensions of 0.258 inches thick, 19 inches in length, and 21 inches in width, it offers excellent tensile strength and abrasion resistance characteristic of Nylon 6/6. Its inherent lubricity reduces friction and wear, making it suitable for gears, bearings, and wear pads. This material also exhibits good electrical insulating properties and resistance to a wide range of chemicals and solvents.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools (e.g., band saw, CNC router). 2. Machine or form the material to achieve the desired part geometry, ensuring proper tooling and speeds for Nylon. 3. Secure the fabricated component using suitable fasteners or adhesives, considering Nylon's thermal expansion properties.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without considering Nylon's tendency to melt or chip. | Utilize sharp, specialized cutting tools designed for plastics and ensure adequate cooling during the cutting process. |
| Over-tightening fasteners, leading to stress cracking in the Nylon. | Employ appropriately sized fasteners and consider the use of washers to distribute load, avoiding excessive torque. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom machined gears and sprockets, Wear strips and guide rails, Bushings and bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||