This high-performance Nylon stock sheet offers superior wear resistance, low friction, and excellent impact strength. Its robust nature makes it a reliable solution for demanding material handling and fabrication needs.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.947" |
| Length | 47" |
| Width | 46" |
Precision-manufactured to tight tolerances, this Nylon stock sheet measures 0.947 inches in thickness, with dimensions of 47 inches in length and 46 inches in width. Engineered from high-grade Nylon, it exhibits exceptional tensile strength, abrasion resistance, and a low coefficient of friction, minimizing wear and energy loss in moving parts. This material's inherent toughness allows it to withstand significant impact and load-bearing stress, making it ideal for fabricating custom components, wear strips, guide rails, and impact plates within material handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the mounting surface to ensure optimal adhesion or seating. 2. Precisely cut the Nylon sheet to the required dimensions using appropriate tooling for plastic. 3. Secure the sheet using mechanical fasteners (bolts, screws) or a suitable industrial adhesive, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard metalworking tools for cutting, leading to excessive heat and material deformation. | Utilize sharp carbide-tipped blades designed for cutting plastics, and employ cooling methods to prevent overheating. |
| Over-tightening fasteners, which can cause stress concentrations and cracking in the Nylon. | Employ washers to distribute load and tighten fasteners to a snug fit, avoiding excessive torque. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Wear Strips and Bushings, Guide Rails and Rollers, Impact Plates and Bumpers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||