This high-quality Nylon Stock Sheet, in a self-lubricating grade, offers exceptional wear resistance and low friction. Engineered for durability and smooth operation in demanding environments, it’s an ideal material for custom components.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.198" |
| Length | 45" |
| Width | 47" |
Specified by design engineers worldwide, this Nylon Stock Sheet offers a robust solution for critical applications. With a precise thickness of 0.198 inches, a generous length of 45 inches, and a width of 47 inches, it provides ample material for fabrication. The inherent self-lubricating properties of this specialized nylon grade significantly reduce friction and wear, extending the service life of moving parts. Its excellent mechanical strength, chemical resistance, and thermal stability make it suitable for a broad range of industrial uses, including bushings, bearings, wear pads, and guide rails.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the nylon stock sheet to the desired dimensions using appropriate cutting tools. 2. Machine the cut parts to precise tolerances, ensuring smooth surface finishes. 3. Install components securely, verifying proper alignment and freedom of movement.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper support, leading to chipping or delamination. | Employ sharp, carbide-tipped cutting tools and ensure adequate support for the sheet during cutting to prevent damage. |
| Over-tightening fasteners, which can cause stress concentrations and potential cracking in the nylon. | Use appropriate torque settings when fastening nylon components, or consider using washers to distribute load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Low-friction bushings and bearings, Wear strips and guide components, Custom fabricated machine parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||