This robust Nylon stock sheet provides exceptional durability and wear resistance for demanding fabrication projects. Its precise dimensions and material properties ensure reliable performance in industrial settings.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.029" |
| Length | 28" |
| Width | 33" |
Manufactured under strict quality controls, this Nylon stock sheet features a nominal thickness of 0.029 inches, a length of 28 inches, and a width of 33 inches. Composed of high-grade Nylon, it exhibits excellent tensile strength, abrasion resistance, and low friction properties. Its excellent machinability allows for precise cutting, shaping, and drilling, making it ideal for custom components, wear pads, and protective coverings in diverse industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and stable. 2. Precisely mark cut lines using appropriate measuring tools. 3. Cut the Nylon sheet using a suitable saw (e.g., band saw, table saw) with a fine-tooth blade, maintaining a steady feed rate. 4. Deburr all cut edges to remove any sharp fragments.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect saw blade, leading to rough cuts and potential material chipping. | Utilize a sharp, fine-tooth saw blade specifically designed for cutting plastics. Ensure proper blade alignment and a controlled cutting speed to achieve clean edges. |
| Applying excessive force during cutting, causing heat buildup and potential melting or warping of the Nylon. | Allow the saw to do the work; do not force the material. Maintain a consistent, moderate feed rate to prevent excessive friction and heat generation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Protective Guards and Shields, Custom Gaskets and Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||