This robust Nylon stock sheet offers superior strength and wear resistance. Its precise 0.591" thickness and generous 45" x 20" dimensions make it ideal for custom fabrication and critical component manufacturing.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.591" |
| Length | 45" |
| Width | 20" |
Engineered for reliability and performance, this Nylon stock sheet boasts a substantial 0.591" thickness, providing exceptional structural integrity for demanding applications. Crafted from high-grade Nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, minimizing wear and tear in moving parts. The material's inherent toughness and machinability allow for precise custom shaping and integration into complex systems, ensuring consistent performance under load and environmental stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate surface, ensuring it is clean, dry, and free of contaminants. 2. Accurately measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet using approved mechanical fasteners or adhesives, adhering to manufacturer's recommendations for optimal bond strength.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or joint failure. | Thoroughly degrease and abrade the substrate before applying fasteners or adhesives to ensure maximum surface contact and bond integrity. |
| Over-tightening fasteners, causing stress concentration and potential cracking of the Nylon. | Use torque-limiting tools and ensure fasteners are installed to the recommended torque specifications, distributing load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guide rails, Custom tooling and fixtures, Gears and bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||