This robust 0.268-inch thick nylon stock sheet offers exceptional durability, wear resistance, and low friction. Ideal for custom fabrication of machine components, wear pads, and impact surfaces in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.268" |
| Length | 33" |
| Width | 18" |
Specified by design engineers worldwide, this high-density nylon stock sheet features a precise thickness of 0.268 inches, with a substantial length of 33 inches and a width of 18 inches. Its inherent properties include excellent tensile strength, superior abrasion resistance, and good chemical inertness, making it suitable for a broad spectrum of industrial applications. The material's low coefficient of friction minimizes wear and tear in moving parts. Its machinability allows for precise custom shaping to meet intricate design requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., bandsaw, CNC router) to fabricate the component to specification. 3. Employ standard machining practices for drilling, milling, and shaping as required. 4. Ensure all edges are deburred for optimal performance and safety.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard woodworking tools without proper setup, leading to melting or chipping. | Employ sharp carbide-tipped or HSS cutting tools with adequate coolant and appropriate feed rates for plastics. |
| Over-tightening fasteners, causing stress concentration and potential cracking. | Use washers and torque fasteners to the recommended specifications for nylon components to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear plates and guides, Bushings and bearings, Chute liners and impact surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||