This robust Nylon Stock Sheet is engineered for superior performance in high-wear environments. Its inherent lubricity significantly reduces friction and enhances longevity in critical mechanical components.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.489" |
| Length | 37" |
| Width | 39" |
Built to exacting engineering tolerances, this Nylon Stock Sheet boasts a precise thickness of 0.489 inches, a generous length of 37 inches, and a width of 39 inches. Manufactured from high-grade Nylon, it exhibits exceptional wear resistance, low coefficient of friction, and excellent impact strength. This material is ideal for fabricating custom bearings, bushings, wear pads, and guide rails where self-lubricating properties are paramount for extended service life and reduced maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired component dimensions on the stock sheet. 2. Utilize appropriate cutting tools (e.g., band saw, CNC router) to fabricate the component to specification. 3. Smooth all edges and mating surfaces to ensure optimal contact and performance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting tool selection leading to material chipping or melting. | Employ sharp, high-quality cutting tools with adequate cooling for nylon to prevent thermal damage and ensure clean cuts. |
| Neglecting edge finishing, resulting in premature wear or binding. | Thoroughly deburr and smooth all cut edges to guarantee smooth operation and prevent stress concentration. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Bearings and Bushings, Wear Strips and Guide Rails, Gears and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||