This premium Nylon stock sheet provides exceptional durability and resilience. Its robust composition makes it a go-to material for demanding safety applications where impact, abrasion, and wear resistance are paramount.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.487" |
| Length | 19" |
| Width | 43" |
Engineered for reliability and performance, this 0.487-inch thick Nylon stock sheet offers a superior combination of strength, toughness, and chemical resistance. Measuring 19 inches in length and 43 inches in width, it is manufactured from high-grade nylon, providing excellent impact absorption and a low coefficient of friction. This material is ideal for fabricating protective guards, wear pads, and high-stress components in industrial settings where consistent performance under duress is critical. Its inherent properties ensure longevity and reduced maintenance requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to ensure optimal adhesion or mechanical fastening. 2. Cut the nylon sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet using industry-standard mechanical fasteners or adhesives suitable for nylon and the substrate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools that can melt or chip the nylon. | Employ sharp, carbide-tipped blades designed for cutting plastics, and ensure proper feed rates and cooling to prevent melting. |
| Over-tightening fasteners, which can cause stress concentration and cracking. | Use washers to distribute load and tighten fasteners to a snug fit, avoiding excessive force. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Impact-resistant machine guards, Abrasion-resistant wear strips, Protective shims and pads.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||