This robust Nylon stock sheet offers exceptional wear resistance and dimensional stability. Precisely manufactured for demanding industrial applications, it serves as an ideal material for custom fabricated components.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.806" |
| Length | 35" |
| Width | 29" |
Built to exacting engineering tolerances, this 0.806-inch thick Nylon stock sheet measures 35 inches in length and 29 inches in width. Composed of high-density Nylon 6/6, it exhibits superior tensile strength, excellent abrasion resistance, and good impact strength. Its low coefficient of friction makes it suitable for sliding components and wear pads. This material is readily machinable, allowing for intricate designs and precise fits in various manufacturing processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and stable. 2. Mark the desired cut lines accurately using a suitable marker. 3. Employ a high-quality saw blade designed for plastic or nylon, ensuring proper tooth pitch and set. 4. Maintain a consistent, moderate feed rate to prevent melting or chipping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an incorrect saw blade for nylon, leading to melting or uneven cuts. | Utilize a saw blade specifically designed for plastics or nylon, with a fine tooth pitch and negative hook angle. |
| Applying excessive force during cutting, causing chipping or binding. | Maintain a steady, controlled feed rate and allow the saw to do the work; avoid forcing the material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Bushings and Bearings, Wear Strips and Guides, Gears and Sprockets, Prototyping and Tooling Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||