This robust Nylon stock sheet is engineered for reliability in pneumatic systems. Its precise dimensions and durable material properties ensure consistent performance under pressure and mechanical stress.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.281" |
| Length | 33" |
| Width | 14" |
Manufactured under strict quality controls, this 0.281" thick Nylon stock sheet offers superior tensile strength and excellent abrasion resistance, crucial for pneumatic component fabrication. Its 14" width and 33" length provide ample material for custom-cut seals, valve components, and cylinder components. Nylon's inherent lubricity reduces friction, enhancing operational efficiency and extending service life in demanding industrial environments. This material exhibits good chemical resistance and thermal stability, making it suitable for a wide range of operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired component dimensions on the Nylon stock sheet using a suitable marker. 2. Precisely cut the marked section using a band saw, laser cutter, or CNC routing equipment, ensuring clean edges. 3. Deburr all edges to remove any sharp fragments and ensure a smooth finish before assembly into the pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive heat during cutting, leading to melting or warping of the Nylon. | Employ cutting tools with appropriate speed and feed rates, and utilize coolant or air blast to manage heat buildup. |
| Improperly deburring edges, leaving sharp points that can damage seals or O-rings. | Thoroughly inspect and deburr all cut edges with a fine file or chamfering tool to ensure a smooth, safe surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder seals and wear bands, Valve seats and poppets, Custom pneumatic manifold components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||