This robust Nylon stock sheet is engineered for demanding industrial environments. Its exceptional wear resistance and impact strength make it a superior choice for critical components and protective surfaces.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.555" |
| Length | 44" |
| Width | 41" |
Purpose-built for heavy-duty applications, this Nylon stock sheet offers superior abrasion resistance, high tensile strength, and excellent impact toughness. With dimensions of 0.555 inches thick, 44 inches in length, and 41 inches in width, this material is ideal for fabricating robust components such as wear pads, cutting boards, chute liners, and durable machinery parts. Its low coefficient of friction minimizes wear and extends service life in high-stress operational scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired cut lines on the Nylon stock sheet. 2. Utilize appropriate sawing equipment (e.g., band saw, circular saw) with a suitable blade for plastics to achieve clean cuts. 3. Deburr edges to remove any sharp or rough material post-cutting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a saw blade not designed for plastics, leading to melting or chipping. | Employ a high-tooth-count carbide-tipped blade specifically formulated for cutting Nylon or other hard plastics. |
| Applying excessive force during cutting, causing stress fractures or poor cut quality. | Allow the saw to do the work; maintain a steady, controlled feed rate to prevent overheating and material damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Cutting Surfaces and Work Mats, Chute and Hopper Liners, Gears and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||