This robust Nylon stock sheet offers exceptional durability and wear resistance. Its precise dimensions and material properties make it ideal for custom fabrication and critical component manufacturing.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.387" |
| Length | 46" |
| Width | 27" |
Built to exacting engineering tolerances, this 0.387-inch thick Nylon stock sheet measures 46 inches in length and 27 inches in width. Manufactured from high-grade Nylon, it exhibits excellent tensile strength, impact resistance, and a low coefficient of friction, reducing wear and tear in dynamic applications. Its inherent chemical resistance and electrical insulating properties further enhance its versatility across a wide range of industrial environments. This sheet is optimized for precision machining, allowing for intricate custom parts with superior dimensional stability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the required dimensions on the Nylon stock sheet. 2. Employ appropriate cutting tools designed for polymers, such as a table saw with a fine-tooth carbide blade, to achieve clean edges. 3. Securely fasten or integrate the cut component into its intended application using compatible fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard woodworking blades for cutting, which can lead to chipping or melting. | Utilize blades specifically designed for plastics or polymers, ensuring a sharp edge and appropriate feed rate to prevent heat buildup and clean cuts. |
| Overheating the material during machining, causing deformation or weakening. | Employ cooling methods such as compressed air or cutting fluids, and maintain appropriate spindle speeds and feed rates to manage heat generation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and guides, Machine components and fixtures, Electrical insulators and bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||