This industrial-grade Nylon Stock Sheet offers exceptional durability and low friction for custom hand tool fabrication. Its robust material properties ensure longevity and performance in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.254" |
| Length | 42" |
| Width | 20" |
Precision-manufactured to tight tolerances, this 0.254-inch thick Nylon Stock Sheet measures 42 inches in length and 20 inches in width. Composed of high-density nylon, it exhibits excellent abrasion resistance, self-lubricating properties, and superior impact strength. This material is ideal for applications requiring reduced wear and friction, such as custom jig components, protective liners, and non-marring work surfaces. Its machinability allows for precise shaping and fitting to meet specific industrial requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired dimensions on the nylon stock sheet using a suitable marking tool. 2. Cut the sheet to the marked dimensions using appropriate cutting tools (e.g., industrial saw, router). 3. Machine or shape the cut piece to integrate into the hand tool assembly, ensuring a secure fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to melting or chipping of the nylon. | Employ sharp cutting tools designed for plastics, and maintain appropriate feed rates to prevent excessive heat buildup. |
| Over-tightening fasteners when integrating into an assembly, potentially causing stress cracks. | Use appropriate torque settings and consider using washers to distribute pressure evenly when fastening. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom hand tool components, Protective liners for work surfaces, Jig and fixture components, Wear pads and slides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||