This high-performance Nylon stock sheet provides exceptional dielectric strength and mechanical integrity for demanding electrical and lighting applications. Its robust material properties ensure reliable insulation and protection.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.057" |
| Length | 25" |
| Width | 28" |
A high-performance industrial component, this Nylon stock sheet is engineered with a precise thickness of 0.057 inches, a generous length of 25 inches, and a width of 28 inches. Fabricated from premium industrial-grade nylon, it exhibits excellent electrical insulation properties, high tensile strength, and superior resistance to impact and abrasion. Its inherent thermal stability makes it suitable for environments where temperature fluctuations are present, ensuring consistent performance in critical electrical and lighting assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove any dust or debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut sheet to the desired location, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard utility knives for cutting, leading to uneven edges and potential material stress. | Employ specialized cutting tools such as a router with a straight bit or a precision saw designed for plastics to achieve clean, accurate cuts. |
| Over-tightening fasteners, which can cause cracking or deformation of the nylon sheet. | Use washers to distribute pressure and tighten fasteners only until snug, avoiding excessive torque. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Electrical insulation barriers, Lighting fixture components, Protective covers for electrical enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||