This industrial-grade Nylon stock sheet offers exceptional impact resistance, low friction, and excellent wear properties. Its precise dimensions make it ideal for custom fabrication and demanding engineering tasks.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.384" |
| Length | 15" |
| Width | 29" |
Precision-manufactured to tight tolerances, this 0.384-inch thick Nylon stock sheet measures 15 inches in length and 29 inches in width. Crafted from high-density nylon, it exhibits superior tensile strength, chemical resistance, and a low coefficient of friction, minimizing wear in dynamic applications. Its inherent electrical insulating properties and resistance to moisture absorption ensure consistent performance across varied environmental conditions. This material is engineered for durability and ease of machining, making it suitable for a wide range of fabrication projects.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the sheet according to your design specifications. 2. Utilize appropriate cutting tools (e.g., saw, router) for precise shaping. 3. Employ standard fastening or bonding methods suitable for nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to material chipping or melting. | Employ sharp, appropriate cutting tools designed for plastics, and maintain adequate cooling to prevent overheating. |
| Over-tightening fasteners, which can cause stress cracking in the nylon. | Use washers and avoid excessive torque when securing the sheet to prevent material damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and bushings, Protective guards and covers, Jigs and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||