This high-density Nylon stock sheet offers exceptional durability and wear resistance. Its precise 0.423" thickness and generous 40" x 40" dimensions make it ideal for custom fabrication, tooling, and demanding industrial applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.423" |
| Length | 40" |
| Width | 40" |
Specified by design engineers worldwide, this 0.423" thick Nylon stock sheet provides superior mechanical strength, excellent wear resistance, and good chemical inertness. Manufactured to exacting tolerances, its 40" x 40" dimensions offer ample material for a wide range of applications including custom jigs, fixtures, wear pads, and protective barriers. The inherent toughness of Nylon ensures longevity and reliable performance under stress and friction. Ideal for environments requiring non-sparking properties and good electrical insulation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using mechanical fasteners or adhesives suitable for Nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics. | Utilize sharp, carbide-tipped blades specifically designed for cutting Nylon to prevent melting and ensure clean edges. |
| Over-tightening fasteners, which can cause stress cracking. | Apply fasteners with appropriate torque, and consider using washers to distribute pressure evenly across the Nylon surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Jig and Fixture Construction, Wear Strips and Bushings, Protective Guarding and Shields.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||