This robust Nylon Stock Sheet is engineered for demanding pneumatic systems. Its superior strength, low friction, and excellent wear resistance ensure reliable performance in critical applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.907" |
| Length | 30" |
| Width | 22" |
Manufactured under strict quality controls, this 0.907" thick Nylon stock sheet measures 30" in length and 22" in width. Composed of high-grade nylon, it exhibits exceptional tensile strength, abrasion resistance, and a low coefficient of friction, making it ideal for components subjected to constant movement and wear within pneumatic systems. Its inherent toughness and resistance to moisture and chemicals ensure longevity and consistent performance in industrial environments. This material is also easily machinable for custom part fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Precisely cut to desired dimensions using appropriate cutting tools. 3. Machine or form the component according to pneumatic system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to delamination or imprecise edges. | Employ sharp, carbide-tipped blades or specialized routing bits designed for plastics to achieve clean, accurate cuts. |
| Over-tightening fasteners, which can cause stress cracking in the nylon. | Use appropriate torque settings and consider incorporating washers to distribute load evenly when fastening. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder components (e.g., wear bands, guide rings), Seals and gaskets for pneumatic valves and actuators, Custom fabricated pneumatic manifold parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||