This robust Nylon stock sheet is engineered for superior performance in harsh industrial settings. Its 0.240" thickness and excellent material properties make it ideal for fabricating custom components requiring high strength and wear resistance.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.240" |
| Length | 23" |
| Width | 20" |
Designed for demanding industrial environments, this Nylon stock sheet offers exceptional mechanical strength, high abrasion resistance, and a low coefficient of friction. Measuring 0.240 inches thick, 23 inches in length, and 20 inches in width, it is manufactured from high-quality Nylon 6/6, ensuring reliable performance in applications such as wear pads, gears, bushings, and custom tooling where dimensional stability and durability are critical. The material's inherent toughness and chemical resistance further enhance its suitability for diverse operational demands.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and accurately mark cut lines on the Nylon stock sheet using a suitable marking tool. 2. Utilize a band saw, circular saw, or CNC router equipped with a fine-tooth blade appropriate for plastics to perform the cut. 3. Deburr edges smoothly with a file or deburring tool to remove any sharp edges and ensure a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a blade with too few teeth, causing chipping or melting. | Employ a blade with a higher TPI (teeth per inch) count specifically designed for cutting plastics to achieve a clean, precise cut. |
| Applying excessive heat during cutting, leading to material deformation. | Maintain a consistent feed rate and use adequate lubrication (if recommended for the specific cutting process) to manage heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear strips and guides, Fabrication of non-metallic bearings and bushings, Prototyping of gears and functional components, Impact-resistant guards and covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||