This robust Nylon stock sheet is engineered for demanding pneumatic applications. Its precise dimensions and superior material properties ensure reliable performance and longevity in diverse industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.022" |
| Length | 39" |
| Width | 44" |
A proven choice for industrial professionals, this 0.022-inch thick Nylon stock sheet boasts a generous 39-inch length and 44-inch width, providing ample material for custom fabrication. Nylon's inherent toughness, excellent abrasion resistance, and low coefficient of friction make it ideal for pneumatic components such as diaphragms, seals, and flexible tubing. Its resistance to oils, greases, and common solvents further enhances its suitability for challenging operational settings, ensuring sustained performance and reduced maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to required dimensions using a sharp industrial blade or die. 2. Smooth any rough edges to ensure a proper seal. 3. Install component, ensuring alignment and secure fastening according to system specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull cutting tool, leading to ragged edges and compromised seal integrity. | Utilize a sharp, high-quality industrial cutting tool designed for plastics, ensuring clean and precise cuts. |
| Over-tightening fasteners, which can stress or crack the nylon material. | Hand-tighten fasteners initially and then tighten only to the manufacturer's specified torque, using appropriate tools. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic seals and gaskets, Diaphragms for pneumatic actuators, Custom pneumatic component fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||