This robust Nylon stock sheet, engineered for high-stress pneumatic systems, offers exceptional wear resistance and dimensional stability for critical component fabrication.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.364" |
| Length | 13" |
| Width | 43" |
Designed for demanding industrial environments, this 0.364" thick Nylon stock sheet (13" x 43") provides superior mechanical strength, excellent abrasion resistance, and good chemical compatibility. Its inherent toughness makes it ideal for fabricating custom pneumatic components such as wear pads, valve seats, and internal seals. The material exhibits low friction, ensuring smooth operation and extended service life in dynamic systems. Suitable for moderate pressure and temperature ranges typical in industrial pneumatic circuits, it offers a reliable and cost-effective solution for custom part creation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Machine the fabricated part to final specifications, ensuring tight tolerances. 3. Install the component into the pneumatic system, verifying proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to delamination or rough edges. | Utilize sharp, carbide-tipped tools designed for cutting plastics to ensure clean, precise edges. |
| Over-tightening fasteners, which can cause stress concentration and cracking. | Apply fasteners with appropriate torque, using washers to distribute load if necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pneumatic cylinder components, Wear strips and guide elements, Sealing surfaces and gaskets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||