This high-performance Nylon stock sheet offers exceptional durability and wear resistance. Its substantial 0.959-inch thickness provides superior impact absorption and load-bearing capacity for demanding material handling applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.959" |
| Length | 23" |
| Width | 26" |
Specified by design engineers worldwide, this Nylon stock sheet is engineered for extreme service conditions. Measuring 0.959 inches thick, 23 inches in length, and 26 inches in width, it exhibits a high tensile strength, excellent abrasion resistance, and low coefficient of friction. These properties make it ideal for fabricating wear strips, chute liners, impact pads, and custom material handling components where longevity and performance are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the Nylon sheet using suitable fasteners or adhesives, ensuring proper alignment and contact for optimal performance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, leading to chipped or uneven edges. | Employ sharp, industrial-grade cutting blades designed for plastics to achieve clean, precise cuts. |
| Insufficient surface preparation before bonding or fastening, resulting in weak adhesion. | Thoroughly clean and degrease both the Nylon surface and the substrate to ensure optimal bonding strength. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Chute Liners, Wear Strips and Guides, Impact Pads, Bushings and Bearings, Custom Fabrication for Material Handling Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||