This high-performance Nylon stock sheet is engineered for superior wear resistance and low friction. Its self-lubricating properties make it ideal for applications requiring smooth operation and extended component life.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.159" |
| Length | 22" |
| Width | 36" |
A proven choice for industrial professionals, this Nylon stock sheet offers exceptional mechanical strength, excellent abrasion resistance, and a low coefficient of friction. Measuring 0.159 inches thick, 22 inches in length, and 36 inches in width, it is manufactured from a specialized lubricating grade of nylon, providing inherent self-lubricating capabilities. This makes it ideal for fabricating wear pads, bushings, rollers, and guide components in demanding environments where reduced friction and enhanced durability are critical. Its machinability allows for precise customization to meet specific design requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately cut the nylon sheet to the desired dimensions using appropriate cutting tools. 2. Machine or form the cut piece according to the application's specifications. 3. Securely install the fabricated component, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners against the nylon, leading to deformation. | Use appropriate washers and torque specifications to prevent excessive stress on the nylon component. |
| Using adhesives not compatible with nylon, resulting in poor bonding. | Consult material compatibility charts and select adhesives specifically designed for nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Rollers and conveyor components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||