Engineered for exceptional durability and impact resistance, this 0.206-inch thick Nylon stock sheet provides robust protection. Its dense matrix offers superior wear and chemical resistance, ideal for critical safety components.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.206" |
| Length | 17" |
| Width | 19" |
Precision-manufactured to tight tolerances, this Nylon stock sheet measures 0.206 inches in thickness, 17 inches in width, and 19 inches in length. Crafted from high-performance nylon, it exhibits excellent tensile strength, superior abrasion resistance, and good chemical stability, making it suitable for applications requiring load-bearing capabilities and protection against wear. The material's inherent toughness ensures reliable performance in demanding environments, offering a cost-effective solution for custom fabrication of guards, wear pads, and structural components where impact absorption is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove any debris or contaminants. 2. Accurately mark and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fitted Nylon component to the designated mounting surface using industry-standard fasteners, ensuring a flush and stable installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for high-density polymers. | Employ sharp, carbide-tipped blades specifically designed for cutting plastics to achieve clean, precise edges and prevent material chipping. |
| Over-tightening fasteners, leading to stress concentration and potential cracking. | Use washers to distribute load evenly and tighten fasteners to the manufacturer's recommended torque specifications to avoid material deformation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Machine guards and protective shielding, Wear strips and guide rails, Impact-absorbing components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||