This high-performance Nylon Stock Sheet is engineered for robust pneumatic systems. Its superior durability and resistance to wear make it ideal for demanding operational environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.210" |
| Length | 43" |
| Width | 13" |
A high-performance industrial component, this Nylon Stock Sheet offers exceptional mechanical properties for demanding pneumatic applications. With a precise thickness of 0.210 inches, a generous length of 43 inches, and a width of 13 inches, it provides ample material for fabrication. Composed of high-grade nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, crucial for reducing wear and tear in dynamic pneumatic components such as seals, bushings, and wear pads. Its inherent toughness also provides good impact resistance, ensuring longevity in high-stress environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the nylon stock sheet to the required dimensions using appropriate tooling. 2. Ensure all mating surfaces are clean and free of debris before assembly. 3. Securely fasten the fabricated component using standard pneumatic assembly practices and hardware.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting techniques leading to edge fraying or deformation. | Utilize sharp, specialized cutting tools designed for plastics to achieve clean, precise edges. Coolant may be necessary for certain cutting methods to prevent overheating. |
| Over-tightening fasteners, which can cause stress concentration and material cracking. | Apply appropriate torque values during assembly, referencing fastener specifications and the material's properties. Use washers to distribute load if necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pneumatic seals and gaskets, Wear pads and guide elements for cylinders, Bushings and bearings in pneumatic actuators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||