Engineered for demanding environments, this 0.095-inch thick nylon stock sheet offers superior toughness, abrasion resistance, and excellent electrical insulation properties for custom fabrication and critical component manufacturing.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.095" |
| Length | 19" |
| Width | 21" |
Specified by design engineers worldwide, this industrial-grade nylon stock sheet provides a robust material solution for a wide range of manufacturing needs. With precise dimensions of 0.095 inches in thickness, 19 inches in width, and 21 inches in length, it ensures consistent performance and reliable fabrication. Nylon's inherent properties, including high tensile strength, excellent wear resistance, low coefficient of friction, and good chemical resistance, make it suitable for applications requiring durability and resistance to harsh operating conditions. Its dielectric strength further enhances its utility in electrical and electronic components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired cut dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw, laser cutter) for precise shaping. 3. Smooth cut edges using a deburring tool or sandpaper for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard woodworking blades for cutting, which can lead to melting and poor cut quality. | Employ blades designed for plastic or metal cutting, often with a higher tooth count and slower feed rate, to prevent excessive heat buildup. |
| Overheating the material during machining, causing deformation or degradation of properties. | Use adequate cooling lubricants or air jets during machining operations to dissipate heat effectively. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and bushings, Electrical insulators and barriers, Gaskets and seals in chemical environments, Machinery components requiring abrasion resistance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||