This high-density Nylon stock sheet offers exceptional self-lubricating properties for demanding mechanical components. Its robust composition ensures superior wear resistance and low friction in critical applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.927" |
| Length | 16" |
| Width | 33" |
Specified by design engineers worldwide, this Nylon stock sheet (0.927" thick, 16" length, 33" width) is engineered for its inherent low coefficient of friction and excellent wear characteristics, reducing the need for external lubricants in many dynamic systems. The material exhibits good tensile strength and impact resistance, making it suitable for fabricating custom bushings, bearings, wear pads, and guiding components. Its machinability allows for precise component creation, ideal for environments requiring smooth operation and extended service life under moderate loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate machining tools. 2. Smooth all cut edges to remove burrs and ensure a clean finish. 3. Install the fabricated Nylon component into its intended application, verifying proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymers, leading to melting or chipping. | Utilize sharp, carbide-tipped cutting tools designed for plastics and machining at appropriate speeds to prevent heat buildup. |
| Over-tightening fasteners, which can cause excessive stress concentration and deformation in the Nylon. | Apply fasteners with controlled torque, using washers if necessary, to distribute load evenly and avoid damaging the material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Bushings and Bearings, Wear Strips and Guides, Slide Plates and Rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||