This robust Nylon stock sheet is engineered for demanding abrading and polishing tasks. Its precise dimensions and superior material properties ensure consistent performance in various industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.076" |
| Length | 30" |
| Width | 35" |
A high-performance industrial component, this 0.076-inch thick Nylon stock sheet, measuring 30 inches by 35 inches, is fabricated from high-grade nylon renowned for its exceptional toughness, abrasion resistance, and low coefficient of friction. Its inherent lubricity makes it ideal for applications where smooth gliding surfaces and reduced wear are critical. This material exhibits excellent impact strength and resistance to a wide range of chemicals, ensuring longevity in harsh operational conditions. It is particularly well-suited for use in wear strips, guides, and polishing pads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the substrate surface thoroughly to remove any contaminants. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for plastics. 3. Secure the sheet to the intended surface using mechanical fasteners or industrial adhesives, ensuring a flush and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to chipping or uneven edges. | Employ sharp, specialized tools designed for cutting Nylon or plastics, such as a fine-tooth saw or a sharp utility knife. |
| Insufficient surface preparation before bonding or fastening. | Ensure the mating surface and the Nylon sheet are impeccably clean, dry, and free of grease or debris to achieve optimal adhesion. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Polishing and Buffing Pads, Protective Linings, Bearing Surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||