This 0.884" thick Nylon stock sheet is engineered for superior wear resistance and low friction. Its self-lubricating properties make it ideal for reducing wear in dynamic applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.884" |
| Length | 42" |
| Width | 21" |
A high-performance industrial component, this Nylon stock sheet offers exceptional mechanical strength and abrasion resistance, critical for reducing wear in high-stress environments. Measuring 0.884 inches in thickness, 42 inches in length, and 21 inches in width, its inherent lubricity minimizes the need for external lubrication, extending component life and reducing maintenance cycles. This material is specifically formulated for applications requiring a durable, low-friction bearing surface, such as wear strips, bushings, and slide plates in material handling and processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully measure and cut the Nylon sheet to the required dimensions. 3. Secure the Nylon component using appropriate fasteners, avoiding over-tightening to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard nylon where lubrication is critical. | Specify and utilize a self-lubricating grade of nylon for enhanced performance and longevity. |
| Excessive clamping pressure during installation. | Apply only sufficient pressure to secure the component, allowing for thermal expansion and contraction without distortion. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Slide Plates and Rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||