This high-density Nylon stock sheet offers exceptional self-lubricating properties for demanding applications. Its robust 0.731" thickness ensures superior strength and wear resistance in critical component manufacturing.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.731" |
| Length | 36" |
| Width | 31" |
Manufactured under strict quality controls, this lubricating Nylon stock sheet measures 0.731 inches in thickness, 36 inches in length, and 31 inches in width. Engineered from a specialized grade of Nylon, it exhibits a low coefficient of friction, excellent abrasion resistance, and good chemical inertness. These properties make it ideal for use in bearings, bushings, gears, and wear pads where reduced friction and extended service life are paramount. Its dimensional stability ensures consistent performance across a wide operating temperature range.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to required dimensions using appropriate cutting tools for Nylon. 2. Machine component to final specifications, ensuring adequate clearance for thermal expansion. 3. Smooth any sharp edges to prevent premature wear or damage to mating surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper cooling, leading to melting or delamination. | Employ sharp, high-speed cutting tools with coolant to maintain low temperatures during machining. |
| Over-tightening fasteners, which can cause stress concentrations and premature failure. | Use appropriate torque specifications and consider washers to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Self-lubricating bearings, Wear strips and guides, Bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||