This robust Nylon stock sheet provides superior wear resistance and mechanical strength for critical industrial applications. Its dense composition ensures durability in high-stress environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.311" |
| Length | 16" |
| Width | 27" |
Designed for demanding industrial environments, this Nylon stock sheet offers exceptional toughness and a low coefficient of friction, making it ideal for wear pads, bushings, and impact-resistant components. Its 0.311-inch thickness, combined with a length of 16 inches and a width of 27 inches, provides ample material for custom machining and fabrication. Nylon's inherent chemical resistance and self-lubricating properties contribute to extended component lifespan and reduced maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired shape on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., band saw, CNC router) for precise fabrication. 3. Smooth all edges and surfaces to remove burrs and ensure proper fitment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive heat during machining, leading to melting or warping of the nylon. | Employ sharp cutting tools and moderate feed rates with adequate cooling to prevent heat buildup. |
| Over-tightening fasteners, which can cause stress cracking in the nylon. | Use washers and torque fasteners to the manufacturer's recommendations, avoiding excessive clamping force. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Impact plates and bumpers, Gears and sprockets, Chute liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||