This robust nylon stock sheet provides exceptional wear resistance and impact strength, making it a superior choice for demanding industrial applications. Its generous dimensions offer versatility in fabrication and custom component creation.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.939" |
| Length | 45" |
| Width | 13" |
Specified by design engineers worldwide, this premium nylon stock sheet offers superior mechanical properties for a wide range of demanding applications. Manufactured from high-grade nylon, it exhibits excellent abrasion resistance, low friction, and high tensile strength. The precise dimensions of 0.939 inches (23.85mm) thickness, 13 inches (330.2mm) width, and 45 inches (1143mm) length ensure consistent performance and ease of machining for custom tooling, wear pads, and structural components in the industrial sector.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface for mounting is clean and free of debris. 2. Cut the nylon stock sheet to the desired dimensions using appropriate cutting tools. 3. Secure the cut nylon piece using mechanical fasteners or adhesives suitable for nylon and the substrate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymers, leading to poor edge quality and material stress. | Employ carbide-tipped blades or specialized plastic-cutting saws for clean, precise cuts and to minimize heat buildup. |
| Over-tightening fasteners, which can cause stress cracking or deformation in the nylon sheet. | Use washers to distribute load and tighten fasteners to a snug, but not excessive, torque. Consider pre-drilling holes slightly larger than the fastener shank. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom tooling and fixtures, Wear strips and guides, Gears and bushings, Protective guards and bumpers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||