This robust 0.313-inch thick Nylon stock sheet offers exceptional strength and durability for demanding industrial applications. Its substantial size (30" x 42") makes it ideal for protective packaging and custom component fabrication.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.313" |
| Length | 42" |
| Width | 30" |
A high-performance industrial component, this Nylon stock sheet is engineered to withstand rigorous conditions. Measuring 0.313 inches in thickness, 30 inches in width, and 42 inches in length, it provides substantial material for various uses. Its inherent properties include excellent tensile strength, high abrasion resistance, and good impact strength, making it suitable for applications requiring protection against wear and tear. The material's low coefficient of friction also contributes to its utility in moving parts and sliding surfaces within an industrial setting. This sheet is a reliable choice for custom fabrication projects and as a protective barrier in shipping and packaging.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the desired dimensions using appropriate cutting tools (e.g., industrial saw, router with a sharp bit). 2. Prepare the mating surfaces, ensuring they are clean and free of debris. 3. Secure the Nylon sheet using mechanical fasteners (bolts, screws) or adhesives, depending on the application's structural requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for dense plastics, leading to poor edge quality and potential cracking. | Employ carbide-tipped blades or specialized plastic cutting bits for clean, precise cuts with minimal stress on the material. |
| Over-tightening fasteners, which can cause stress concentrations and lead to cracking or deformation of the Nylon sheet. | Use washers to distribute load and tighten fasteners to a snug fit, avoiding excessive torque. Consider pre-drilling holes slightly larger than the fastener shank. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Protective liners for shipping crates and containers, Wear pads and guide components in machinery, Custom fabricated parts for industrial equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||