This robust 0.471" thick Nylon stock sheet offers exceptional wear resistance and self-lubricating properties. Its large 25" x 31" dimensions make it suitable for a wide range of custom fabrication and replacement parts.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.471" |
| Length | 25" |
| Width | 31" |
Manufactured under strict quality controls, this nylon stock sheet boasts a substantial 0.471" thickness, ensuring structural integrity and durability. Its dimensions of 25" in length and 31" in width provide ample material for complex machining and component creation. Nylon's inherent properties, including excellent tensile strength, abrasion resistance, and low coefficient of friction, make it ideal for demanding industrial applications such as gears, bearings, wear pads, and protective components where resilience and longevity are paramount. Dimensional stability across varying environmental conditions is a key benefit.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired cut lines on the nylon stock sheet. 2. Utilize appropriate sawing or cutting equipment designed for plastics, ensuring proper blade selection and speed. 3. Carefully deburr all cut edges to remove any sharp or ragged material, preparing the component for its intended use.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard metal cutting tools without proper adjustment. | Employ carbide-tipped blades specifically designed for plastics, and set appropriate feed rates and speeds to prevent melting or chipping. |
| Overheating the nylon during cutting. | Apply coolant or use a slower cutting speed with adequate chip evacuation to manage heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Wear Components, Bushings and Bearings, Gears and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||