This robust Nylon stock sheet is engineered for superior performance in demanding pneumatic systems. Its exceptional strength and wear resistance ensure reliable operation and extended component lifespan.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.885" |
| Length | 35" |
| Width | 32" |
Built to exacting engineering tolerances, this 0.885-inch thick Nylon stock sheet, measuring 35 inches in length and 32 inches in width, offers superior mechanical properties ideal for pneumatic components. Nylon's inherent toughness, excellent abrasion resistance, and low coefficient of friction make it a prime choice for seals, wear pads, and custom-machined parts in high-pressure and dynamic pneumatic environments. Its ability to withstand repeated stress cycles and moderate chemical exposure ensures consistent performance and durability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely machine the Nylon stock to the required dimensions and tolerances for your specific pneumatic component. 3. Install the machined part into the pneumatic system, verifying proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Machining too close to the edge without adequate support. | Utilize proper workholding techniques to prevent warping or cracking during machining, especially for thin features. |
| Exposing the Nylon to excessive UV radiation or extreme temperatures beyond its operational limits. | Select an appropriate grade of Nylon if UV exposure or high-temperature operation is anticipated, or implement protective measures. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic Cylinder Components, Wear Strips and Bushings, Custom Gaskets and Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||