This robust Nylon stock sheet provides superior mechanical strength and wear resistance. Its precise dimensions and inherent material properties make it suitable for demanding industrial applications requiring durability and precision.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.112" |
| Length | 36" |
| Width | 23" |
A high-performance industrial component, this Nylon stock sheet exhibits exceptional tensile strength and abrasion resistance, critical for components subjected to friction and impact. The material's low coefficient of friction reduces wear in moving parts. Its excellent machinability allows for intricate part fabrication with standard tooling. The sheet's dimensions of 0.112" thickness, 36" length, and 23" width offer ample material for a variety of prototyping and production runs, ensuring consistent material properties across the entire surface for reliable component performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting area is clean and well-lit. 2. Accurately measure and mark the desired dimensions on the Nylon sheet using a suitable marking tool. 3. Utilize appropriate cutting tools (e.g., bandsaw, router with a straight bit) designed for plastics to achieve clean and precise cuts. Employ slow, steady feed rates to prevent melting or chipping. 4. Deburr cut edges thoroughly to remove any sharp protrusions and ensure smooth transitions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overheating the Nylon during cutting, leading to melting and poor edge quality. | Use a sharp blade, maintain a slow feed rate, and consider using a coolant if necessary. |
| Improper clamping of the sheet, resulting in vibration and inaccurate cuts. | Securely clamp the Nylon sheet to the work surface, ensuring it is stable and supported. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Gears and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||