Engineered for demanding industrial environments, this robust Nylon Stock Sheet offers superior durability. Its substantial dimensions and material properties make it ideal for custom fabrication and high-stress applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.198" |
| Length | 37" |
| Width | 32" |
Purpose-built for heavy-duty applications, this Nylon Stock Sheet features a precise thickness of 0.198 inches, a generous length of 37 inches, and a width of 32 inches. Fabricated from high-performance nylon, it exhibits exceptional tensile strength, abrasion resistance, and impact toughness. Its chemical inertness and low coefficient of friction contribute to its suitability for a wide array of industrial tasks, including wear components, protective liners, and custom tooling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw) for precise shaping. 3. Securely fasten or integrate the fabricated nylon component into its intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics. | Employ carbide-tipped blades or specialized plastic cutting tools for clean, precise cuts without melting or chipping. |
| Improper fastening leading to stress points. | Utilize fasteners with washers to distribute load and avoid over-tightening, which can cause cracking in nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and guides, Protective liners for chutes and hoppers, Gears and bearing surfaces in heavy machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||