This industrial-grade Nylon stock sheet is engineered for extreme environments. Its robust construction provides exceptional durability, making it the ideal material for critical components in demanding pneumatic applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.475" |
| Length | 17" |
| Width | 42" |
Purpose-built for heavy-duty applications, this 0.475-inch thick Nylon stock sheet (17" x 42") offers an optimal balance of mechanical strength and resilience. Nylon's inherent properties, including high tensile strength, excellent abrasion resistance, and good impact toughness, make it exceptionally well-suited for components subjected to continuous operation and mechanical stress. Its ability to withstand significant load-bearing forces and resist wear ensures longevity in demanding pneumatic systems, including wear pads, seals, and structural elements where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 2. Machine or fabricate the component according to design specifications, ensuring precise tolerances. 3. Install the fabricated component within the pneumatic system, verifying proper fitment and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard plastic cutting tools not designed for high-density materials. | Employ carbide-tipped blades or specialized saws designed for cutting thick, robust plastics to ensure clean and accurate cuts without material degradation. |
| Over-tightening fasteners during installation, leading to stress concentrations. | Utilize appropriate torque specifications during fastening to prevent over-compression of the Nylon, which can cause premature failure or deformation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips for Pneumatic Cylinders, Custom Seals and Gaskets in High-Pressure Systems, Impact-Resistant Bushings and Bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||