This premium Nylon stock sheet is engineered for extreme operational demands. Its inherent lubricity and exceptional wear resistance make it ideal for critical components requiring reduced friction and extended service life.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.855" |
| Length | 17" |
| Width | 32" |
Purpose-built for heavy-duty applications, this Nylon stock sheet boasts a substantial 0.855" thickness, 17" length, and 32" width. Crafted from high-grade Nylon, it exhibits excellent mechanical strength, superior abrasion resistance, and a low coefficient of friction, minimizing wear and heat generation in dynamic systems. Its inherent lubricity is ideal for sliding components, bushings, gears, and wear pads in industrial machinery, material handling equipment, and processing lines where consistent performance under high loads is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris before cutting or machining. 2. Utilize appropriate cutting tools designed for plastics to achieve precise dimensions. 3. Smooth all cut edges to prevent stress concentration and ensure proper fitment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools that can melt or chip the Nylon. | Employ carbide-tipped blades or specialized plastic cutters for clean, efficient machining. |
| Over-tightening fasteners, leading to stress cracking. | Incorporate washers and allow for slight expansion/contraction by not over-torquing fasteners. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Heavy-duty bushings and bearings, Wear strips and guides, Gears and sprockets, Chute liners, Slide plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||